Bosch rexroth MSK Series страница 29 Скачать руководство пользователя

Страница: 29 / 40

Environmental Protection and Disposal

The disposal of the motor components can be done in the normal recycling

process under consideration of the respective valid national regulations.

Recycling

Most of the products can be recycled due to their high content of metal. In

order to recycle the metal in the best possible way, the products must be dis‐

assembled into individual assemblies. Metals contained in electric and elec‐

tronic assemblies can also be recycled by means of special separation pro‐

cesses.

Significant motor components

Basically, our motors consist of the following components:
●

Steel, aluminum, cupper, brass

●

Plastics, insulating and composite material

●

Electronic components

●

Permanent magnets

Plastic parts of the products may contain flame retardants. These plastic

parts are labeled according to EN ISO 1043. They have to be recycled sepa‐

rately or disposed of according to the applicable legal provisions.

Danger due to permanent magnets!

WARNING

Health hazard for persons with heart pacemakers, metallic

implants and hearing aids in direct environment of permanent

magnets.

Crushing hazard of fingers and hand due to heavy attrac‐

tive forces of the magnets.

Risk of destruction of sensitive parts such as watches,

credit cards, ... .

The permanent magnets on the rotor must be demagnetized be‐

fore disposal to avoid injuries or damage.

Dismagnetize magnets

The dismagnetization of the magnets on the rotor is reached via a special

thermal handling. The handling duration is influenced by the frame size of the

rotor. The rotor must remain for 30 minutes in the oven, starting at the time,

the magnetic surface has reached 300 °C. If the magnets are surrounded by

a bandage, we recommend to remove them before heating-up the rotor in an

oven to unfold the magnets.

In the case of successful demagnetization, the magnets can be

separated from the rotor sleeves after cooling of the rotor without

any effort.

Packaging

Out packaging materials do not contain any problematic materials and can be

recycled without any problems. Wood, cardboard and styrofoam are used as

packaging materials.

Batteries and Accumulators

Batteries and accumulators can be labeled with this symbol.

DOK-MOTOR*-MSK*EXGIIK3-IT04-EN-P

Bosch Rexroth AG

27/37

MSK Motors Operation in Potentially Explosive Areas ATEX Directive 2014/34/EU

Environmental Protection and Disposal

Содержание rexroth MSK Series









































Результаты поиска

Содержание rexroth MSK Series

Отзывы:

Похожие инструкции для rexroth MSK Series

Бренды по названию

Популярные бренды

Bosch rexroth MSK Series, Инструкция по эксплуатации

Результаты поиска

Содержание rexroth MSK Series

Отзывы:

Похожие инструкции для rexroth MSK Series

Бренды по названию

Популярные бренды