Bosch rexroth MSK 030 Скачать руководство пользователя страница 55

Страница: 55 / 72

Disassembly and exchange

9.1

Tools required

Motor damage due to strikes onto the motor

shaft

NOTICE

Do not strike the shaft end and do not exceed the allowed

axial and radial forces of the motor.

Use suitable tools when disassembling transmission elements.

Pulling off

①

Shim

Fig. 9-1:

Pulling off the transmission element

Use tools suitable for pulling off. Use a shim to protect the shaft end when

using pulling-off tools. Heat the output element, if necessary.

9.2

Replace the motor

Lethal electric shock by live parts with more

than 50 V!

WARNING

The supply unit may only be replaced by qualified personnel which have

been trained to perform the work on or with electrical devices.

The motor should be replaced by a motor of identical type. This is

the only way to ensure that all parameterizations can remain un‐

changed. Moreover, repeated acceptance within the scope of the

"Integrated switching technology" function is not required.

1. If necessary, note down the previous absolute value
2. Open the main switch
3. Make sure the main switch cannot be switched back on
4. Disconnection plug connections

When exchanging the motor, close open plug sides of power con‐

nections with protection caps if moistening with coolant/lubricant

or soiling must be expected (allowed soiling degree according to

EN 50178: 2).

5. Replace the motor

Observe the machine manufacturer's instructions when exchang‐

ing the motor mechanically.

MSK Synchronous Servomotors

41/57

Disassembly and exchange

R911325169_Edition 03 Bosch Rexroth AG

Содержание rexroth MSK 030









































































Результаты поиска

Содержание rexroth MSK 030

Отзывы:

Бренды по названию

Популярные бренды

Bosch rexroth MSK 030, Руководство по эксплуатации

Результаты поиска

Содержание rexroth MSK 030

Отзывы:

Бренды по названию

Популярные бренды