manualshive.com logo in svg

Bosch rexroth MSK 030, Руководство по эксплуатации

Поделиться
Скачать
Bosch rexroth MSK 030 Скачать руководство пользователя страница 23

4 

About this product

4.1 

Product description

4.1.1 

Technical features

The  motors  of  the  MSK  series  are  three-phase  synchronous  motors  which

are energized by a permanent magnet and are suitable for operation on con‐

verters or inverters of Bosch Rexroth.

Product Three phase synchronous motor

Manufacturer Bosch Rexroth Electric Drives and Controls GmbH

Buergermeister-Dr.-Nebel-Straße 2
97816 Lohr am Main, Germany

Type MSK030, -040, -043, -050, -060, -061, -070, -071, -075, -076, -100, -101, -103, -131, -133

Listed acc. to UL standard (UL) UL 1004, Fifth Edition

Listed acc. to CSA standard (UL) Canadian National Standard(s) C22.2 No. 100-04

UL-files (UL) E 335445

Ambient temperature during operation 0 … 40 °C

Motor design B5 (EN 60034-7)

B35 (EN 60034-7)

Degree of protection IP65 (EN 60034-5)

Vibration severity grade Level A (EN 60034-14)

Concentricity, run-out and alignment  Standard tolerance N (IEC 60072-1) for encoders S1, M1, S3, M3

Optional tolerance R (IEC 60072-1) for encoders S2, M2

Flange  acc. to DIN 42948

Shaft end Cylindric (DIN 748 part 3), keyway optional, centering hole (DIN 332 part 2)

Installation altitude 0 ... 1000 m

Sound pressure level < 75 dB(A)

Insulation class 155 (EN 60034-1)

Balancing Full key balancing

Electrical connection Flange socket for power and encoder

Terminal boxes

Encoder system S1 (optically, Singleturn Hiperface, 128 signal periods)

S2 (optically, Singleturn EnDat 2.1, 2,048 signal periods)
S3 (capacitive, Singleturn Hiperface, 16 signal periods)
M1 (optically, Multiturn Hiperface, 128 signal periods)
M2 (optically, Multiturn EnDat 2.1, 2,048 signal periods)
M3 (capacitive, Multiturn Hiperface, 16 signal periods)

Motor holding brake (optional) Principle: electrically released U

N

 24V DC (±10%)

In the case of special design, details named in the operating in‐

structions can deviate. In this case, order the supplementary doc‐

umentation.

MSK Synchronous Servomotors  

9/57

About this product

R911325169_Edition 03 Bosch Rexroth AG

Содержание rexroth MSK 030









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды