Bosch Rexroth MKE Series, Руководство по планированию проекта

Страница: 99 / 134

● Do not exert impact or pressure to the stub shaft.
Fig.10-2: Adhesive label
Transport Requirements for transport according to DIN EN 60271-3-2:
Environmental factor Unit Class 2K3
Low air temperature °C -25
High air temperature °C +70
Max. rel. air humidity % 95
Max. absolute air humidity g/m³ 60
Shock stress see "Technical Data"
Fig.10-3: Conditions for transport
Please observe the following points during transport:
●
Use suitable means of transport and consider the weight of the compo‐
nents (you can find the weight information on the data sheets or on the
type label of the motor).
● Provide shock absorbers if strong vibrations may occur during transport.
● Transport the motors only in the horizontal position.
● Use cranes with lifting sling belts to lift the motors.
Fig.10-4: Lifting and transporting motors by means of lifting sling belts
Bearing Requirements for storage according to DIN EN 60271-3-1.
Environmental factor Unit Class 1K3
Low air temperature °C -5
High air temperature °C +45
Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drives
and Controls
| Bosch Rexroth AG 97/131
State of Delivery, Identification, Handling, Transport and Storage