Bosch rexroth MBT Скачать руководство пользователя страница 270

Страница: 270 / 422

8.5

Motor cooling

8.5.1

Coolant connection

Stators with cooling jacket without

housing

If MBT torque motors are delivered as kit motors without motor housing for

installation in machines, the connection technology has to be selected and di‐

mensioned by the machine manufacturer.
For more information about motor cooling, please refer to chapter

chapter

9.7 "Motor cooling" on page 264

and chapter

chapter 9.8 "Motor tempera‐

ture monitoring" on page 277

Stators with cooling jacket and

housing

MST stators can also be order pre-assembled in the stator housing. This mo‐

tor design has two connection threads an the stator housing for connecting

the liquid coolant. Note the particular dimension sheet of the stator with re‐

gard to dimension, position and allowed use (inlet and outlet connection) of

the borings.
For more information about motor cooling, please refer to

chapter 9.7 "Motor

cooling" on page 264

and

chapter 9.8 "Motor temperature monitoring" on

page 277

●

Note that inlet and outlet are only allowed in the position

specified in the dimension sheet.

●

Monitoring systems for flow rate, pressure and temperature

should be installed within the cooling circuit.

8.5.2

Operating pressure

The maximum coolant supply pressure of 6 bar applies to all MBT motors

based on the effective current pressure directly at the coolant connection of

the motor. Pressure fluctuations in the cooling circuit must not exceed ± 1 bar

during engine operation.

Please note that additional glands or branches in the cooling cir‐

cuit can reduce the flow and supply pressure of the coolant.

Therefore select amply dimensioned connection glands and line

cross sections.

Motor destruction!

WARNING

●

Observe the permissible inlet pressure of the coolant.

●

Eliminate impermissible pressure fluctuations and pressure peaks by

design measures.

258/409

Connection technique

MBT High Synchronous Torque Motors

Bosch Rexroth AG R911298798_Edition 08

Содержание rexroth MBT







































































































































































































































































































































































































































Результаты поиска

Содержание rexroth MBT

Отзывы:

Похожие инструкции для rexroth MBT

Бренды по названию

Популярные бренды

Bosch rexroth MBT, Руководство пользователя

Результаты поиска

Содержание rexroth MBT

Отзывы:

Похожие инструкции для rexroth MBT

Бренды по названию

Популярные бренды