Bosch Rexroth MAD100 Скачать руководство пользователя страница 15

Страница: 15 / 72

About this documentation

1.1

Validity of the documentation

This instruction has to be complied with by assemblers, operator, service en‐

gineers and facility operators and contains notes about handling the motor
Before operating motors, read this operating instruction to ensure a safe and

smooth functionality and a long motor lifetime.

1.2

Editions of this documentation

Edition

Release

date

Notes

03/2022 Encoder option M6 / S6 removed

11/2011 First edition

Tab. 1-1:

Record of revisions

1.3

Additional documentation

This operating instruction is only valid with the following Rexroth documenta‐

tion:

Title

Document type

Document number

Asynchronous Housing Motors MAD/MAF

Project Planning

Manual

DOK-MOTOR*-MAD/MAF****-PR□□-□□-P

Rexroth Connection Cable

Selection Data

DOK-CONNEC-CABLE*INDRV-AU□□-□□-P

Tab. 1-2:

Additional documentation

1.4

Information presentation

Safety instructions

The safety instructions in this documentation describe signal words (danger,

warning, caution, note) and a signal symbol (acc. to ANSI Z535.6-2006).(dan‐

ger, warning, caution, note) .
The signal word is intended to draw your attention to the safety instructions

and describes the seriousness of the danger. The warning triangle with excla‐

mation mark indicates the danger for persons.

DANGER

Non-compliance with this safety instructions will result in death or severe per‐

sonal injury.

WARNING

Non-compliance with this safety instructions can result in death or severe

personal injury.

MAD / MAF Asynchronous Housing Motors

1/57

About this documentation

R911336186_Edition 02 Bosch Rexroth AG

Содержание Rexroth MAD100









































































Результаты поиска

Содержание Rexroth MAD100

Отзывы:

Похожие инструкции для Rexroth MAD100

Бренды по названию

Популярные бренды

Bosch Rexroth MAD100, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth MAD100

Отзывы:

Похожие инструкции для Rexroth MAD100

Бренды по названию

Популярные бренды