Bosch Rexroth IndraMotion MTX 11 VRS Скачать руководство пользователя страница 67

Страница: 67 / 304

New -> Directory

With this function, a new subdirectory is created in the currently selected di‐

rectory. After this function has been activated, a dialog is opened in which the

name of the new subdirectory has to be entered. The maximum length of a

directory name within the directory system of the NC kernel is limited to 30

characters. On the mount directory, the maximum length for a directory corre‐

sponds to the Windows conventions.

Fig.5-40:

Dialog: Create new directory

●

With "Ok", the dialog is closed and the directory is created.

●

With "Cancel", the dialog is closed and no new directory is created.

●

If you fail to enter a name and press "Ok", an error message is shown.

●

If the name already exists in the directory, an error message is shown.

●

If the directory name has more than 30 characters and the file is in the

directory system of the NC kernel, an error message is shown.

Delete

The current directory and all subdirectories and files contained therein are de‐

leted. The deleting process has to be confirmed by the user:
Yes

The directory is deleted

The deleting process is cancelled

It is possible to mark several directories and / or files in the list (multiple selec‐

tion) and delete them afterwards.
During the deletion process, a status box is shown which visualizes the pro‐

gress during deletion.

The root directory cannot be deleted!

Rename

With this function, the currently selected directory can be renamed. After this

function has been activated, a dialog is opened in which the user has to enter

the name of the new directory. The default assignment in the input field is the

current directory name. The maximum length of a name in the directory system

of the NC kernel is limited to 30 characters. On the mount directory, the maxi‐

mum length for a directory corresponds to the Windows conventions.

Fig.5-41:

Dialog: Rename directory

●

With "Ok", the dialog is closed and the directory is renamed.

●

With "Cancel", the dialog is closed - the directory is not renamed.

●

If you fail to enter a name and press "Ok", an error message is shown.

DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation

Bosch Rexroth AG

65/301

General Operation and Visualization

Содержание Rexroth IndraMotion MTX 11 VRS

















































































































































































































































































































Результаты поиска

Содержание Rexroth IndraMotion MTX 11 VRS

Отзывы:

Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 67 / 304

Результаты поиска

Содержание Rexroth IndraMotion MTX 11 VRS

Отзывы: