Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 66 / 304

Fig.5-39: "Export" dialog
In this dialog, the user selects the target directory in which the selected files /
directories are copied from the MTX Navigator.
If the element (file / directory) to be exported already exists in the target direc‐
tory, it is overwritten without asking the user.
Furthermore, the dialog provides the possibility to create a new subfolder which
can immediately be selected as target directory.
Program Selection Functions
Link NC Program If this function is selected in the function bar, the selected NC program is au‐
tomatically linked in case of a program selection.
Show tree With this function, the view of the MTX Navigator is switched between Tree
+List.
Cancel selection This function closes the program selection without a selected NC program.
Confirm selection
This function executes a program selection with the selected NC program. The
selected NC program is visualized in the NC block display (operating screen
machine).
All selected NC programs are marked with an individual symbol in
the list of the MTX Navigator.
●
Selected NC programs in the current channel contain a
"green" symbol.
● Selected NC programs in non-selected channels contain a
"gray" symbol.
Directory Functions
These are functions which can only be used for directories (folders). These
functions can only be called if a folder object is focused in the tree or in the list.
The directory functions are only active in the context "Program" or
in the IndraWorks Engineering.
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
64/301
General Operation and Visualization