Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 60 / 304

By pressing <Ctrl>+<A>, all entries of the list can be highlighted (multiple se‐
lection). By means of the keys <Shift> and <Ctrl> in connection with the key
<Space> areas of entries or several individual entries can be marked / de‐
marked.
With the keys <PgUp>, <PgDn>, <Pos1> and <End>, you jump one screen
page upwards or downwards or to the first or the last entry in the list.
The columns of the list can be maximized or minimized by the mouse. In the
extreme case, a column can be "hidden" by completely moving together the
column with the mouse. In order to reopen these hidden columns later on, the
mouse has to be moved from the right side to the respective column separator
and the column has to be zoomed out to the right while pressing the left mouse
button.
The changing of the sorting column and direction is only possible with the
mouse by clicking on the respective column head for one or several times. A
little triangle highlights the current sorting column and indicates the selected
sorting direction whereas the apex of the triangle shows in the direction of the
ascending values.
In spite of sorting, the order of the following groupings is always
adhered to:
●
The return label is always at the top.
● Afterwards, all directories are shown.
● The last group is the group of the files.
The MTX Navigator saves all column widths as well as the sorting column and
the sorting direction. These data is always saved on the hard disk when the
navigator is left and exited.
5.4.3 Functions
General Functions
General functions do not depend on the context!
Place file filter With the filter dialog , certain data types can be excluded from the display in the
list and thus the selection of the files can be limited.
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
58/301
General Operation and Visualization