Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 57 / 304

This is used in the IndraWorks Operation as well as in the IndraWorks Engi‐
neering.
Fig.5-32: MTX Navigator in the characteristic "Tree+List" of the IndraWorks Op‐
eration
List The subdirectories and the files are listed in the "List" . This representation is
only used in the context "Program selection" ( chapter "Context-dependent
Functions of the MTX Navigators" on page 56 ) in the IndraWorks Operation.
Fig.5-33: MTX Navigator in the characteristic "List" of the IndraWorks Operation
Object types Basically every object type named in the following tree as well as in the list of
the MTX Navigator can have its individual context menu and individual assign‐
ments of the function keys and the menu bar. This results in the change of the
assignment of the function toolbar and the characteristics of the menu bar or
the context menu, when changing between tree and list or selecting another
object type.
One distinguishes between the following object types:
● the folder "root" in the tree (Root = the root directory)
● all other folders in the tree
● the return flag in the list
● all other folders in the list
● all files of the list
● the list itself
Status bar In the status bar, the currently selected object (directory or file) is visualized.
If the focus is on a directory in the tree,
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 55/301
General Operation and Visualization