Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 239 / 304

To delete a breakpoint, press <F3 delete breakpoint>) or double-click on the
red circle with the cursor.
If there are several breakpoints in the program, they can all be deleted together
with <F3> in the second F-keypad.
The deactivation and deletion of all breakpoints refers only to the
Program displayed in the window.
Listing all existing breakpoints: <F5 List all breakpoints> in the global F-keypad level opens a dialog. This dialog
contains a summary and the status of the breakpoints of all programs and the
respective subroutines:
●
Channel assignment of the selected program(s)
● Position (position of the line marked with a breakpoint related to the be‐
ginning of the program)
● Name and path of the program containing breakpoints
Fig.11-4: "Breakpoints" dialog
Additionally, the "Breakpoints" menu is enabled, disabled and deleted.
Loading active breakpoints from
the configuration file
If there are active breakpoints in the NC-Analyzer workspace of a respective
NC program and you want to load these into the NC-Analyzer (with <F4 Load
workspace> in the topmost F-keypad level), the NC-Analyzer mode has to be
active.
Otherwise, the breakpoints stored are set to inactive.
Monitoring and Editing Variables
It can be checked for individual program variables whether the logical value
assignment was carried out correctly by the program.
Variable groups:
●
Permanent variables
● Definable permanent variables
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 237/301
Extended Functionality