Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 233 / 304

No.
Window in the NC-An‐
alyzer
Function Possible entries
1 Variables Displays of all CPL variables in tree structure
according to the following groups:
●
Permanent
● Defined permanent
● Global
● Local
● System variables
Select variables to be monitored. They are
displayed in the "Watch" window.
2 Watch Watch variables:
List of selected variables. The current values
are displayed in the "Watch values" window.
Deletion of variable that should not be
watched any longer.
3 Watch values Display and refresh values:
Display of the variable values from the
"Watch" window at program runtime.
Editing of variable values (except simple
string variables) at program runtime.
4 Program Program window:
Displayed are:
●
The operation mode as icon, the channel
( $x) as well as the program name includ‐
ing path
● Program code
● The block processed at runtime
● Breakpoints
Read-protected programs are not displayed.
● Find Text
● Set, delete, activate and deactivate
breakpoints
5 Quick Watch Display current variable value:
List of selected variables. The current values
are displayed in the "Quick Watch values" win‐
dow. The values are not updated. In the next
NC step, the Quick Watch window is cleared.
Deletion of variable that should not be
watched any longer.
6 Quick Watch values Display current values:
Display of the variable values from the "Quick
Watch" window at program runtime.
Editing of variable values (except simple
string variables) at program runtime.
7 Stack Select subroutine:
It displays the subroutine nesting of the selec‐
ted NC program.
Selection of a subroutine from the subrou‐
tine structure currently active.
8 Output Status display:
Display of messages (MSG, GMSG, etc.) and
errors on the NC program and the NC-Ana‐
lyzer.
Deletion of displays.
9 File File system:
Display of the file system of the control. Selection of a program to be displayed in
the "Program" window (this is no program
selection in the control).
F-Keypad
Below the workspace, 8 F-keys are allocated that can be operated with the
mouse or the function keys <F2> ... <F9>:
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 231/301
Extended Functionality