Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 219 / 304

P: 3 Initialize BAPAS database
P: 4 SERCOS initialization
P: 5 Start NCB-TCP server
P: 6 Start SERCOS startup
P: 7 Mount NFS file systems
P: 8 Synchronization with SERCOS
P: 9 Enabling NCB-TCP server (communication with user interface)
RUN Normal operation
Fig.10-39: Display of startup phases
For critical system errors, boot panic errors or active MTX shutdown, the display
changes in:
SF A critical system fault is pending
BP A boot panic error is pending
SD Shutdown active
Fig.10-40: Error status display
If the monitor is active, the monitor status is displayed:
M: A Ethernet active
M: 8 Ethernet inactive
M: L Loading active
M: d Deletion active
M: NMI The monitor is in an NMI routine (error or power down)
M: E Internal error in monitor
M: H Hardware unknown
Fig.10-41: Display of active monitor
Startup Mode
The startup mode determines the behavior of the MTX during startup.
Startup mode changes become effective only during the next startup.
Startup
mode
Meaning
0 Normal operation
All existing data and file systems are retained. The root file system is
checked during startup. If a defective file system is detected, a critical
system error is displayed. A new (empty) root file system is automatically
created during the next startup.
1 PLC stop
The behavior corresponds to startup mode 0 with the difference that the
PLC remains in the STOP state and the PLC user program is not pro‐
cessed.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 217/301
Diagnostics