Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 154 / 304

Fig.7-31: D-correction editor
Number of Correction Sets A D-correction table can contain a maximum of 99 D-correction data sets (D1-
D99). The number of D-correction tables is unlimited.
Unit of the Table (mm/inch) The unit of a D-correction table can be determined on the basis of the column
headers of L1, L2, L3 and R ([mm] or [inch]).
The unit of a D-correction table is already determined from param‐
eter 9020 00010 of the configuration data during the creation of the
table and is stored with the table.
Number of Decimal Positions
The number of decimal positions displayed is specified by parameters 6020
00021 and 6020 00022 in the configuration data.
Operating the D-Correction Editor
General
Only the functions affecting the D-correction editor are described here. The
general operation of table editors is described in chapter 7.5.2 "Operation" on
page 143 .
function keys in the D-Correction Editor
The following table shows all function keys of the D-correction editor:
F-keypad
level
<F2> <F3> F4 <F5> <F6> <F7> <F8> <F9>
1. Level
Add correc‐
tion set
Remove
correction
set
Additive Exit D-cor‐
rections
2. Level
File... Edit... Navigate... Exit D-cor‐
rections
File
New... Open... Save As... Print Exit all zero
offsets
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
152/301
Programming