Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 121 / 304

contents, appears. Confirm deletion with "OK". Exit the process with <ESC> or
"Cancel".
Modify With <F4 Change NC sequence>, existing block sequences can be edited. The
menus are laid out similarly to those under "New definition".
File handling With <F5 File handling>, a new F-key layer for file operations is opened.
Selection With <F6 Select NC sequence>, the desired sequence can be selected. When
"New NC sequence" is selected, this is always inserted in the front.
Channel Selection With <F7 Channel selection for NC sequences… > you can switch between
global and channel-specific operation.
Cancel Exit the process and return to the NC editor using <F8 Cancel> or via <Esc>.
Apply Press <F9 Apply> to copy the selected block order into the last cursor position
space in the NC program.
Functions of the Second Level of F-keys
Copy/Cut With <F2 Copy> or <F3 Cut>, all NC block sequences of the selected channel
are put into buffer storage. After they are "pasted", the sources of the NC block
sequences that were edited using "Cut" are deleted.
Export With <F5 Export>, all of the NC block sequences of the selected channel are
placed into a file, which can be saved as desired.
Import With <F6 Import>, a file saved using "Export" can be pasted back into the se‐
lected channel as NC block sequences.
Channel Selection With <F7 Channel selection for NC sequences… > you can switch between
global and channel-specific NC block sequences.
Delete With <F8 Delete>, the NC block sequences of the selected channel are per‐
manently removed.
Back With <F9 Back>, you can return to the first F-keypad.
Paste - GNP Geometry (Software License)
This function is used to retrieve the geometry definition of graphic NC pro‐
gramming. The command opens its own dialog which covers that of the NC
Editor. GNP can only be used with the licenses for workshop programming of
turning or milling; otherwise, these functions are blocked.
You will find further information about GNP in the manual "Rexroth
IndraMotion MTX Workshop Programming Turning and Milling".
Paste - GNP Cycle (Software License)
This function is used to retrieve the editing definition of graphic NC program‐
ming. The command opens its own dialog which covers that of the NC Editor.
GNP can only be used with the licenses for workshop programming of turning
or milling; otherwise, these functions are blocked.
Paste - Paste Cycle
Overview
For frequently used processing procedures, retrievals of standard or user cy‐
cles can be pasted into the NC program. As long as all information about its
parameters and its retrieval are defined, a guided entry of all parameters can
be made using the cycles dialog.
DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation Bosch Rexroth AG 119/301
Programming