Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 118 / 304

Example:
Entry of a parameter: Printing date: #PRINT_DATE#
File - Exit NC Editor
This function exits the open NC editor.
Sequence If the NC program opened by the user has been created, a dialog appears after
the "Save query " has been acknowledged where you can enter an identifier
and specify the storage location.
By default, the identifier is set to "NPG_ <time stamp>" (year/month/day_hour/
minute_second).
The "Save query " has three buttons.
●
"Yes"
saves the program and closes the editor,
● "Cancel"
returns the user to the editor without saving,
● "No"
rejects the file contents and closes the editor.
If a previously existing program containing unsaved changes is edited, a dialog
("Yes", "No", "Cancel") requests the user to decide whether he wishes to save
the changes made. The "Cancel" button aborts the "Exit" function.
If the "No" button is selected, the changes are discarded and the NC editor is
closed.
If the "Yes" button is pressed, the NC program is saved and the editor is closed.
If the NC program to be saved was selected, the program is automatically re‐
selected after saving.
File - Exit All NC Editors
This function closes all open NC editors.
Process (for each editor window) If an NC program opened by the user contains unsaved changes, a dialog per
program is displayed, as in "Exit NC-Editor", requesting the user to decide
whether he wants to save the changes; in case of new programs the user is to
specify an identifier and the storage location in addition.
7.2.3 Functions under Edit...
Edit - Undo
Keyboard shortcuts <Ctrl>+<Z>
This function permits the last 50 editing steps to be undone.
With this function, the modifications of individual lines can be undone (delete
line, paste line, editing procedures within a line, as well as cutting, pasting and
deleting blocks that cover one or more lines).
Edit - Redo
Keyboard shortcuts <Ctrl>+<Y>
This function permits redoing editing steps which have been undone.
Edit - Cut (Block)
Keyboard shortcuts <Ctrl>+<X>
The area selected is copied to the clipboard and deleted in the NC program.
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
116/301
Programming