Bosch Rexroth IndraMotion MTX 11 VRS, Руководство по применению, Страница: 116 / 304

Restriction: If several lines are selected, only complete lines are enclosed
by the block.
● Block enumeration: Automatic NC or CPL block enumeration is possible.
Editor Commands Commands can be selected via:
●
Function keys
● Keyboard shortcuts.
Syntax highlighting Syntax highlighting displays NC block components in different colors according
to their syntactic meaning and their status (e.g. faulty status).
It is distinguished between:
●
NC words
● Comments and notes
● NC/CPL block numbers
● Label agreements
● Jump commands (conditional/unconditional jump)
User Administration The respective user rights are required to edit and to reselect a program. If the
user does not have editing rights, the program can be opened, but in read-only
mode. If user rights are insufficient, a possibility to enter the rights is provided.
Active NC Program If the active program is retrieved via the NC screen or the MTX Navigator, the
program is automatically selected again after the "Save query" (answer "Yes")
and the "Reselection query" (answer "Yes"). Beforehand, it is checked whether
all requirements for reselection are met. If the reselection query is not answered
with "Yes", the program is not saved and is thus not selected.
If the program contains GNP cycle calls, a compiler for these cycles is retrieved
beforehand (software license required).
If a reselection is impossible (channel active), the channel can be reset so that
saving and reselection can be repeated.
Cursor Position after Opening After opening the editor, the cursor is located on the block currently processed
in the NC kernel. This line is marked in case the active NC program has been
opened. If the editor is opened from the NC simulation, the current cursor po‐
sition is identical to the latest simulated block. In case the error/warning is
program-related (partial program error, GNP error, error from the simulation),
the cursor is placed on the error first identified.
7.2.2 Functions under File...
File - Save
Keyboard shortcuts <Ctrl>+<S>
This function saves the NC program in the directories of the user interface and
cleans the internal error list of the editor.
Sequence If the NC program has been created, a file dialog appears to assign an identifier
to the NC program and specify the storage location.
By default, the identifier is set to "NPG_ <time stamp>" (year/month/day_hour/
minute_second), but can be modified by the user. The file suffix is set by default
to "npg" (for "NC program"). The <Cancel> button aborts the "Save" function.
When the <Save> button is pressed, the program is saved to the NC program
directory under the identifier shown.
Bosch Rexroth AG DOK-MTX***-NC*OP***V11-AP01-EN-P
Rexroth IndraMotion MTX 11VRS Standard NC Operation
114/301
Programming