Bosch REXROTH IndraMotion MLD, Начало работы

Страница: 28 / 104

4-8
Preparation and Assembly Rexroth IndraMotion MLD
DOK-IM*MLD-F*STEP**V**-KB01-EN-P
Note: In order that the parameter setting of desired IP address,
network mask and default gateway takes effect, switch the
control voltage for the IndraDrive controller off and on again.
•
Exit IndraWorks
Setting IP Address and Network Mask in PC
To establish Ethernet communication to IndraDrive you have to assign an
IP address and subnet mask for the unassigned Ethernet connection at
your PC or laptop.
Call Windows "Control Panel" and open network properties by double-
clicking symbol "
Network and Dial-up Connections "
Start\Settings\Control Panel\Network and Dial-up Connections
Fig. 4-6: Establishing the dial-up connection
By double-clicking network connection or network card to be set, open
status window for this connection.
Click "Properties" to call property sheet.
Establishing Dial-Up Connection