Bosch Rexroth IndraMotion MLD Series Скачать руководство пользователя страница 73

Страница: 73 / 270

MLD(-M) behavior

When a program is modified or downloaded, the local axis is switched to

"AH" or "AB" when using MLD-M, as long as the PLC has control. Remote

axes are also switched to "AH" or "AB" when in control (via MLD-M system

mode). In addition, a message box is displayed on the screen before the

download dialog if an axis is under MLD control. This message indicates that

the axis (axes) is (are) stopped during the following download (not Online

Change).

Messages when logging in

If a program was modified, a dialog displays during login, providing you with

several options:

Fig. 4-22:

Messages when logging in

4.6.2

General (for MLD-S and MLD-M)

General information

This section describes all general functions regarding how MLD-S and MLD-

M react to errors. MLD-S and MLD-M specifically are described in separate

sections.

Brief description and overview

An overview of all possible errors in PLC blocks is provided in the

section "Error reference lists" in the Library Description of

MLD-2G.

Functional features

MLD has been integrated in the error handling of the drive firmware. Fatal

system errors are handled by the drive firmware. In this case, the drive imple‐

ments a defined handling method. Other system errors caused by PLC pro‐

gramming are handled in the PLC.

Errors handled in the drive

●

The drive reacts to fatal exception errors, such as incorrect address ac‐

cess or floating point exception. There are defined reactions to these er‐

rors (see Reference Book for diagnostic messages, chapter "Behavior in

the case of fatal system errors").

●

Drive errors and drive warnings can be recognized at any time via the

diagnostic drive message (cf. S-0-0390, S-0-0095, etc.).

●

A warning or an error is generated from a PLC program that can be trig‐

gered using simple function calls:

DOK-INDRV*-MLD3-**VRS*-AP02-EN-P

Bosch Rexroth AG

71/267

Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18

Basic functions of Rexroth IndraMotion MLD

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth IndraMotion MLD Series















































































































































































































































































Результаты поиска

Содержание Rexroth IndraMotion MLD Series

Отзывы:

Bosch Rexroth IndraMotion MLD Series, Руководство по применению, Страница: 73 / 270

Результаты поиска

Содержание Rexroth IndraMotion MLD Series

Отзывы: