Bosch Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C, Руководство по планированию проекта, Страница: 248 / 276

Classification of mechanically active materials 2S5
Classification of mechanical ambient conditions 2M4
Tab. 10-1: Allowed classes of ambient conditions during transport
For a better overview, some essential environmental influencing variables of
the previously mentioned classifications are listed. Unless otherwise speci‐
fied, the specified values are the values of the particular class. However,
Bosch Rexroth reserves the right to adjust these values at any time based on
future experiences or changed environmental factors.
Allowed transport conditions
Environmental factor Symbol Unit Value
Temperature
T
T
°C
-20 ... +80 1)
Air humidity
(relative air humidity, cannot be com‐
bined with a quick temperature
change)
φ % 75 (at +30 °C)
Occurrence of salt mist
Not permitted 1)
1) Differs from DIN EN 60721-3-2
Tab. 10-2: Allowed transport conditions
Before transport, empty the liquid coolant from the liquid-cooled
motors to avoid frost damage.
Transport by air If motor components with permanent magnets are shipped by air, the
DGR (Dangerous Goods Regulations) of the IATA (International Air Transport
Association) for hazardous materials of class 9 which also include magne‐
tized substances and objects must be observed. For example, these regula‐
tions are applicable for
●
Secondary parts of synchronous linear motors
● Rotors of synchronous kit motors
● Rotors of synchronous housing motors (if shipped as motor compo‐
nents, i.e., separated from the stator or motor housing in case service
work is required)
For information on the maximum allowed magnetic strenghts and methods of
measuring such magnetic field strengths, please refer to the current IATA
DGR (chapter 3.9.2.2).
238/265
Handling and transport
MAD / MAF Asynchronous Housing Motors
Bosch Rexroth AG R911295781_Edition 11