Bosch Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C Скачать руководство пользователя страница 15

Страница: 15 / 276

Important instructions for use

2.1

Intended use

2.1.1

Introduction

. Rexroth products are designed and manufactured using the latest state-of-

the-art-technology. The products are tested prior to delivery to ensure opera‐

tional safety and reliability.
The products may only be used as intended. Failure to use them in the inten‐

ded way may cause situations resulting in property damage and personal in‐

jury.

In case of unintended use of our products, Bosch Rexroth, as the

manufacturer, does not provide any warranty, liability or compen‐

sation for damages; the risks associated with intended use of the

products lie solely with the user.

Before using Bosch Rexroth products, the following prerequisites have to be

fulfilled to ensure that they are used as intended:
●

Personnel that in any way, shape or form uses our products first have to

read and understand the relevant safety instructions and be familiar with

their intended use.

●

Hardware products have to be left in their original condition, i.e. no

structural changes may be made. Software products must not be de‐

compiled and their source code must not be changed.

●

Damaged or defective products must not be installed or put into opera‐

tion.

●

It has to be ensured that products are installed in compliance with all

regulations specified in the documentation.

2.1.2

Areas of use and application

MAD and MAF asynchronous motors of Rexroth are designed to be used as

rotary main drive motors. The following are typical fields of application:
●

Machine tools,

●

Printing and paper converting machines

●

Packaging and food machines and

●

Forming machines

●

...

For application-specific use of the motors, device types with different drive

power and different interfaces are available.
To control and monitor the motors, it may be necessary to connect additional

sensors and actuators.

The motors may only be used with the accessories and attach‐

ments specified in this documentation. Components that are not

expressly mentioned may neither be attached nor connected. The

same applies for cables and lines.
The device may only be operated in the explicitly specified config‐

urations and combination of components and in compliance with

the respective functional description of the software and firmware.

MAD / MAF Asynchronous Housing Motors

5/265

Important instructions for use

R911295781_Edition 11 Bosch Rexroth AG

Содержание Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C





















































































































































































































































































Результаты поиска

Содержание Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C

Отзывы:

Похожие инструкции для Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C

Бренды по названию

Популярные бренды

Bosch Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C

Отзывы:

Похожие инструкции для Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C

Бренды по названию

Популярные бренды