manualshive.com logo in svg

Bosch Rexroth IndraDrive Mi, Руководство по планированию проекта, Страница: 297 / 340

Поделиться
Скачать
Bosch Rexroth IndraDrive Mi Скачать руководство пользователя страница 297

11 

Commissioning, operation, diagnostics and mainte‐

nance

11.1 

Notes on commissioning

11.1.1 

General information

High electrical voltage! Danger to life, risk of

injury by electric shock or serious injury!

WARNING

Read and observe the detailed safety instructions contained in this documen‐

tation in chapter "Safety instructions for electric drives and controls".

11.1.2 

Preparation

1. Keep the documentation of all used products ready.
2. Check the products for damage.
3. Check all mechanical and electrical connections.
4. Activate safety devices and monitoring systems of the installation.

11.1.3 

Procedure

Commission the drive system according to the instructions contained in the

corresponding product documentation. See the Functional Description of the

firmware for the corresponding information.
The commissioning of drive controllers and control unit can require additional

steps. The functionality and performance check of the installations is not part

of motor commissioning; instead, it is carried out within the scope of the com‐

missioning of the machine as a whole. Observe the information and regula‐

tions of the machine manufacturer.

11.2 

Notes on operation

WARNING! Lethal electric shock from live parts with

more than 50 V!
Never operate the KCU02 drive connection box with‐

out the touch guard mounted.
See also 

chapter 9.4.2  "Touch Guard" on page 255

.

Tab. 11-1:

DOK-INDRV*-KCU02+KSM02-PR03-EN-P 

Bosch Rexroth AG

295/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

Commissioning, operation, diagnostics and maintenance

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01  

Содержание Rexroth IndraDrive Mi





















































































































































































































































































































































Отзывы:

Нет отзывов