Bosch Rexroth IndraDrive Mi KCU02, Руководство по планированию проекта

Страница: 50 / 422

work requires. To comply with these qualifications, it is necessary, among
other things,
●
to be trained, instructed or authorized to switch electric circuits and
devices safely on and off, to ground them and to mark them.
● to be trained or instructed to maintain and use adequate safety
equipment.
● to attend a course of instruction in first aid.
Qualified personnel for handling
functionally safe products
Individuals configuring, commissioning and operating functionally safe
products must have the knowledge specified under " Qualified persons ".
Additionally, these individuals must be familiar with technical safety concepts
as well as prevailing standards and regulations in the field of functional
safety.
User A user is a person installing, commissioning or using a product which has
been placed on the market.
3.2 General information
3.2.1 Using the Safety instructions and passing them on to others
Do not attempt to install and operate the components of the electric drive and
control system without first reading all documentation provided with the
product. Read and understand these safety instructions and all user
documentation prior to working with these components. If you do not have
the user documentation for the components, contact your responsible
Rexroth sales partner. Ask for these documents to be sent immediately to the
person or persons responsible for the safe operation of the components.
If the component is resold, rented and/or passed on to others in any other
form, these safety instructions must be delivered with the component in the
official language of the user's country.
Improper use of these components, failure to follow the safety instructions in
this document or tampering with the product, including disabling of safety
devices, could result in property damage, injury, electric shock or even death.
3.2.2 Requirements for safe use
Read the following instructions before initial commissioning of the
components of the electric drive and control system in order to eliminate the
risk of injury and/or property damage. You must follow these safety
instructions.
●
Rexroth is not liable for damages resulting from failure to observe the
safety instructions.
● Read the operating, maintenance and safety instructions in your
language before commissioning. If you find that you cannot completely
understand the application documentation in the available language,
please ask your supplier to clarify.
● Proper and correct transport, storage, mounting and installation, as well
as care in operation and maintenance, are prerequisites for optimal and
safe operation of the component.
● Only qualified persons may work with components of the electric drive
and control system or within its proximity.
● Only use accessories and spare parts approved by Rexroth.
36/407
Safety instructions for electric drives and controls
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Bosch Rexroth AG R911335703_Edition 04