Bosch Rexroth IndraControl XFE01.1-SY-01 Скачать руководство пользователя

Страница: 44 / 52

15.2 Accessories and spare parts

For ordering information on accessories and spare parts, refer to

chapter 5

"Spare parts and accessories" on page 8

15.3 Ordering data

Type code

Product description

Part number

XFE01.1-SY-01

Extension Module Safety CPU for

IndraControl XM

R911173399

16 Disposal

16.1 General information

Dispose the products according to the respective valid national standard.

16.2 Return

For disposal, our products can be returned free of charge. However, the

products must be free of remains like oil and grease or other impurities.
Furthermore, the products returned for disposal must not contain any undue

foreign substances or components.
Send the products free of charge to the following address:

Bosch Rexroth AG

Electric Drives and Controls

Bürgermeister-Dr.-Nebel-Straße 2

97816 Lohr, Germany

16.3 Packaging

The packaging material consists of cardboard, plastics, wood or styrofoam.

Packaging material can be recycled anywhere.
For ecological reasons, please do not return empty packages.

17 Service and support

Our worldwide service network provides an optimized and efficient support.

Our experts offer you advice and assistance should you have any queries. You

can contact us 24/7.
Service Germany
Our technology-oriented Competence Center in Lohr, Germany, is responsible

for all your service-related queries for electric drive and controls.
Contact the Service Hotline and Service Helpdesk under:

38/45
Service and support

IndraControl XFE01.1-SY-01 Safety Ex-

tension Module

Bosch Rexroth AG R911376654_Edition 03

Содержание Rexroth IndraControl XFE01.1-SY-01





















































Результаты поиска

Содержание Rexroth IndraControl XFE01.1-SY-01

Отзывы:

Похожие инструкции для Rexroth IndraControl XFE01.1-SY-01

Бренды по названию

Популярные бренды

Bosch Rexroth IndraControl XFE01.1-SY-01, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth IndraControl XFE01.1-SY-01

Отзывы:

Похожие инструкции для Rexroth IndraControl XFE01.1-SY-01

Бренды по названию

Популярные бренды