Bosch Rexroth IndraControl XFE01.1-SY-01 Скачать руководство пользователя

Страница: 41 / 52

12.2.3 LED on XD1 plug

Fig. 12-3: LEDs on the XD1 plug

The following function is assigned to the LED on the XD1 plug:

LED

Color

Function

Green

24 V supply voltage connected and within the permitted range

Green

All internal voltages are present

Green

Module is ready to operate

Tab. 12-4: LED function on the XD1 plug

13 Troubleshooting and debugging

13.1 General information

For information on the display LED and the pushbutton, refer to

chapter 12.2

"Operating and error displays" on page 32

Repairs at the device by the customer are not permitted. Exceptions

are maintenance works listed in the chapter "Maintenance".
For further information in the event of repair, please contact the

Bosch Rexroth Service.

14 Maintenance

Only the maintenance works at the device listed in this chapter are

permitted.
For further information in the event of repair, please contact the

Bosch Rexroth Service.

IndraControl XFE01.1-SY-01 Safety Ex-

tension Module

35/45

Maintenance

R911376654_Edition 03 Bosch Rexroth AG

Содержание Rexroth IndraControl XFE01.1-SY-01





















































Результаты поиска

Содержание Rexroth IndraControl XFE01.1-SY-01

Отзывы:

Похожие инструкции для Rexroth IndraControl XFE01.1-SY-01

Бренды по названию

Популярные бренды

Bosch Rexroth IndraControl XFE01.1-SY-01, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth IndraControl XFE01.1-SY-01

Отзывы:

Похожие инструкции для Rexroth IndraControl XFE01.1-SY-01

Бренды по названию

Популярные бренды