Bosch Rexroth IndraControl XFE01.1-SY-01, Руководство по эксплуатации

Страница: 33 / 52

10.5.2 External power supply unit
The voltage is supplied via the PELV power supply units with safe
separation acc. to EN 50178 and EN 60950-1.
All control components are supplied from 24 V voltage supplies.
Use the Bosch Rexroth power supply unit VAP01.1H-W23-024-010-NN, part
number R911171065, for the logic supply. For further information on the
external power supply unit and on the creation of overvoltage categories, refer
to the documentation of the power supply unit (refer to chapter 1.5 "Related
documents" on page 2 ).
All lines of the 24 V voltage supply have to be routed separately from lines
carrying higher voltages.
All peripherals, such as digital sensors or actuators connected to the interfaces
of the control, also have to comply with the criteria of safety-separated circuits.
The same external power supply unit has to supply the 24 V voltage
supply of the XMx control and the extension modules. Bridge the
cables between the power connectors XD1.
10.5.3 Voltage supply for the control and for the extension modules
The voltage supply for the control and the extension modules is supplied via the
XD1 plug.
Connect the power connector with cables with a conductor cross-
section of AWG 16-22 (0.34 mm 2 - 1.5 mm 2 ).
Use only copper cables for the connection.
Use only cables designed for ≥75 °C.
Observe the color-coding of the plugs.
Only the "XA-CN01" power connector is permitted to connect the 24
V supply voltage (see chapter 5 "Spare parts and accessories" on
page 8 ).
IndraControl XFE01.1-SY-01 Safety Ex-
tension Module
27/45
Mounting, demounting and electric installation
R911376654_Edition 03 Bosch Rexroth AG