NOTICE
In case of non-compliance with this safety instruction, material damage can
occur.
3.3 Symbols used
Pointers are displayed as follows:
This is a note.
Tips are displayed as follows:
This is a tip.
3.4 Explaining the signal alert symbol on the device
krax
If this symbol is on your device, you have to observe the documentation
on the device. The respective documentation informs on the type of
hazard as well as the steps required to avoid this hazard.
4 Intended use
The Bosch Rexroth Safety extension module IndraControl XFE01.1-SY-01 is a
safety component. It becomes only a safety-related control system (IndraMotion
MLC SafeLogic) if used with a Rexroth IndraControl XMxx control. For
information on the hardware of the IndraMotion MLC SafeLogic, refer to the
documentation of the hardware used (refer to
chapter 1.5 "Related documents"
).
The Safety extension module IndraControl XFE01.1-SY-01 is used to securely
process logic signals of periphery components (sensors) according to the
sequential program and to provide logic signals for periphery components
(actuators). The sequential program can be freely programmed using the
Engineering system. Even though the control system was developed,
manufactured and tested according to the safety standards and certified by an
accredited test institute, using this component does not automatically ensure a
functionally safe machine. The machine manufacturer has to perform a risk
analysis and take corresponding protective measures to reduce risks and to
validate their effect even though it was accredited and developed according to
the safety standards. The functional safety can only be ensured by
comprehensively implementing the requirements (e.g. systematic measures,
software requirements, integrating the sensors and actuators) according to the
applicable standards (DIN EN ISO 13849, DIN EN 62061 and DIN EN 61131-6).
6/45
Intended use
IndraControl XFE01.1-SY-01 Safety Ex-
tension Module
Bosch Rexroth AG R911376654_Edition 03
Содержание Rexroth IndraControl XFE01.1-SY-01
