Bosch Rexroth IndraControl VPP 21.2, Руководство по планированию проекта

Страница: 26 / 75

Standard Meaning
EN 60 204-1 Electrical equipment of machines
EN 61 131-2 PLC product standard
EN 50 081-2 Basic technical standard, emitted interference (industrial
environment)
EN 60 529 Degrees of protection (incl. housings and installation
compartments)
EN 60 068-2 Vibration, free fall and shock
EN 50 178 Clearances and creepage distances
EN 61 000-6-2 Basic technical standard, noise immunity (industrial en‐
vironment)
Fig.4-5: Used standards
Concerning delivered VPP 21.2 all CE requirements are fulfilled.
The devices of the VPP 21.2 family are basically certificated according to
●
UL508 (Industrial Control Equipment) and
● C22.2 no. 14-M95 (CSA)
However, it is possible that there are combinations or extension stages with
restricted or missing certification. Thus, verify the registration according to the
UL marking on the device.
To guarantee an UL/CSA-compliant operation, the following condi‐
tions have to be fulfilled:
●
Use 140/167 F insulated copper wire only.
● Use Class 1 wire only or equivalent.
The UL/CSA marking is only valid for the device in its delivery sta‐
tus. After having modified the device, e. g. after plugging-in addi‐
tional extension cards, the UL compliancy has to be verified.
4.6 Wear Parts
There is no warranty for the following wear parts:
The service life of the backlight in the LC display is limited to a certain number
of operating hours. After this time the backlight will produce only 50 % of its
original brightness. For the used display this time is 10,000 hours. The backlight
cannot be separately exchanged. To exchange the display, please contact the
Bosch Rexroth Service.
The lithium battery to buffer the static memory has a service life of at least 5
years. Thus, the battery has to be exchanged after 5 years to prevent data loss
by a discharged battery. More details regarding the exchange can be found
under chapter 8.4 "Buffer Battery" on page 54 .
The hard disk is an electromechanic wear part, that has to be changed during
the operating time. According to the manufacturer's specifications the hard disk
has been developed for a service life of 60 months or 20,000 operation hours
in consideration of the following conditions:
Project Planning Manual | Rexroth IndraControl VPP 21.2 Electric Drives
and Controls
| Bosch Rexroth AG 19/65
Technical Data
UL/CSA certified
Backlight
Lithium battery
Hard disk