manualshive.com logo in svg

Bosch Rexroth IndraControl VPB 40.3, Руководство по эксплуатации, Страница: 52 / 64

Поделиться
Скачать
Bosch Rexroth IndraControl VPB 40.3 Скачать руководство пользователя страница 52

3. If operated with a UPS, wait until the control cabinet PC switches off auto-

matically. The UPS LED on the connector panel of the control cabinet PC is

red until the UPS switches off the internal power supply unit.

4. Remove all connectors.
5. Remove the safety screw of the hard disk carrier on the front panel of the

control  cabinet  PC.  Now  the  hard  disk  carrier  including  the  hard  disk(s)

can be pulled out from the housing.

1

2

①

Safety screw

②

Hard disk carrier

Fig.  14-1:   Position of the hard disk carrier and the fastening screw

6. The new hard disk parameters are identified automatically by the system. If

the operating system does not boot automatically after switching on, do in-

terrupt the power supply for at least ten seconds and restart.

7. After  booting  the  control  cabinet  PC,  restore  the  user  data  and  the  ope-

rating system settings for the normal operation.

If an SSD (Solid State Drive) is used, avoid defragmentation. Thus,

the wear of the SSD reduces.

14.3  Fan

The fan is located on the top in the PC box.

Bosch Rexroth AG
Maintenance

 Control Cabinet PC

46/57

DOK-SUPPL*-VPB*40.3***-IT05-EN-P

Содержание Rexroth IndraControl VPB 40.3

































































Отзывы:

Нет отзывов