manualshive.com logo in svg

Bosch REXROTH IndraControl VEH 30.2, Руководство по планированию проекта

Поделиться
Скачать
Bosch REXROTH IndraControl VEH 30.2 Скачать руководство пользователя страница 62

6.1.3 

Foil Keyboard

Key Position IndraControl VEH 30.2

Fig.6-4:

Key layout IndraControl VEH 30.2

Operating keys L1 to L8 and R1

to R8

The assignment of the operating keys is fixed.

The evaluation is specified by the respective ap‐

plication software.

Jog keys 1+ to 6+ and 1- to 6-

Pressing the jog keys is transmitted directly into

the control by a real-time protocol via Ethernet.

Navigation keys

The navigation keys include the cursor keys as

well as the ESC key and the OK key.

Operating keys for Operation‐

Desktop

The "F1" and "Tab" keys are required to operate

the "IndraWorks Operation" user interface.

Tab.6-2:

Key assignment

6.1.4 

Touch Screen

All variants are provided with a touch screen, that allows the operation of the

application software via the touch-sensitive surface of the display.
Use the touch screen to do mouse clicks:
●

"Left mouse button": Touch the touch screen shortly on the correspond‐

ing place

Bosch Rexroth AG

 DOK-SUPPL*-VEH*30.2***-PR03-EN-P

 Rexroth IndraControl VEH 30.2 Hand-Held Terminal

60/109

Display and Operating Components

Содержание REXROTH IndraControl VEH 30.2

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды