Bosch REXROTH IndraControl VEH 30.2, Руководство по планированию проекта

Страница: 61 / 112

Because of its symmetric design the IndraControl VEH 30.2 can be comforta‐
bly used by right and left handers. If the working intervals are longer the hold‐
ing arm can be changed.
Due to the safety requirements the enabling has to be interrupted
while changing the hand.
Fig.6-3: Handling of the IndraControl VEH 30.2
The ergonomic housing shape and the molded handles support several types
of use:
Hand-held You can support the IndraControl VEH 30.2 against your body lying on the
forearm, as described above.
Enable (Release) Occurs by the fingers of the holding hand
Operation Occurs with the free hand
Tab.6-1: Hand-held operation and enabling
Putting down on a horizontal sur‐
face
If the operator does not have to activate the enabling, the
IndraControl VEH 30.2 can be also put down on horizontal surfaces. The
combined holding and depositing handle enables to put down the device
easily or to work for a longer time in a sitting position. The incline of the front
panel facilitates the reading of the LC display.
Hanging in holder
The IndraControl VEH 30.2 can be also mounted space-savingly at a vertical
surface. For this, a wall holder is provided as accessories. Mounting the wall
holder is shown in chapter 5 "Dimensions" on page 51 .
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal Bosch Rexroth AG 59/109
Display and Operating Components