Bosch Rexroth IndraControl VDP 40.3, Руководство по планированию проекта

Страница: 49 / 64

9 IndraControl VDP 16.3/40.3/60.3/90.3/92.3
9.1 Touch screen
A touch screen is integrated into the operating displays of the IndraControl
VDP 16.3/40.3/60.3/90.3/92.3 allowing the operation via the touch-sensitive
surface of the display.
The touch screen controller communicates with the control cabinet PC via the
CDI or CDI+ interface using the USB interface internally in the control cabinet
PC.
No driver software has to be installed. For more detailed information, please
refer to the respective documentation of the control cabinet PC (also see
chapter 6.4 "Touch screen" on page 33 ).
Danger of destruction of the touch screen if
operated with inappropriate objects.
NOTICE
Operate the touch screen only with your finger or with a touch pen suitable
for capacitive touch screens.
9.2 VDP USB monitor service
9.2.1 Function
Due to interferences on the CDI-cable, operating the VDP operating display
might not be possible anymore (touch screen, keys and connected USB
devices).
If the service "VDP_USB_Monitor_Service" is installed, data transfer from and
to the VDP operating display is monitored. If a connection abort is detected, a
USB connection reset is initiated by the control cabinet PC. The USB
communication is running again.
Supported hardware:
All VDP operating displays delivered after the 1st of April 2015.
9.2.2 Installing, uninstalling and exiting the service
Bosch Rexroth provides the file "VDP_USB_Monitor_Service_1.2.0.0.zip"
upon request.
To install, proceed with the following steps:
1. Create a "VDP_USB_Monitor_Service" folder in the "C:\Support\Rexroth
\" folder.
2. Copy the file "VDP_USB_Monitor_Service_1.2.0.0.zip" to the directory
"C:\Support\Rexroth\VDP_USB_Monitor_Service".
3. Unzip the file "VDP_USB_Monitor_Service_1.2.0.0.zip" to this folder.
4. Press Start to open the start menu.
5. Enter "Cmd" into the "Search programs/files" search box.
6. Next, select "Cmd" in the search results, right-click to open the context
menu and select "Run as administrator".
7. Click on Yes to confirm the user account control prompt.
8. Go in the command line window to "C:\Support\Rexroth
\VDP_USB_Monitor_Service" and then enter
"DP_USB_Monitor_Service.exe - install".
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Display 43/57
IndraControl VDP 16.3/40.3/60.3/90.3/92.3
R911323862_Edition 07 Bosch Rexroth AG