Bosch Rexroth IndraControl VDP 40.3, Руководство по планированию проекта

Страница: 36 / 64

6.2.1 CDI
Symbol,
LED
Display Description Action
Power
LED green Normal operation
With Y-repeater: This VDP
is the active VDP
–
LED off No supply voltage of 24 V
DC
Check supply voltage!
LED flashing
green
No serial connection to the
control cabinet PC.
With Y-repeater: This VDP
is not the active VDP.
Check cables
HDD
LED yellow Hard disk access –
LED flashes
yellow
Warning: SMART analysis
identifies errors
Exchange hard disk
Temp
LED off
LED flashes
red
LED red
Temperature in safe range
Fan in control cabinet does
not run or runs too slow
Temperature > 50 °C
–
Check the fan in the control
cabinet PC
Reduce the ambient
temperature!
UPS
LED off Normal operation –
LED red The control cabinet PC is
currently operating in the
UPS mode. I.e., the supply
voltage is not available!
Restore the supply voltage,
initiate a controlled restart of
the control cabinet PC!
Tab. 6-1: LEDs for operating and error display on the front panel
6.2.2 CDI+
Symbol,
LED
Display Description Action
Power
LED green Normal operation –
LED off No supply voltage of 24 V
DC
Check supply voltage!
Tab. 6-2: LEDs for operating and error display on the front panel
6.2.3
6.3 Foil Keyboard
6.3.1 System requirements
For the language-independent foil keyboard no language-dependent
keyboard driver is to be installed. The preinstalled English keyboard driver
can also be used for user interfaces of other languages. Therefore, do not
change the delivery settings.
30/57
Display and operating components
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Dis‐
play
Bosch Rexroth AG R911323862_Edition 07