Bosch Rexroth IndraControl VCP 08.2, Руководство по планированию проекта

Страница: 37 / 78

R911310379 / 02 | Rexroth IndraControl VCP 08 Electric Drives and Controls | Bosch Rexroth AG 6 -5
Display and Operating Components
6.2.4 Function Keys/Softkeys
6.2.4.1 Slide-in Identification Strips for the Function Keys
The identifications strips can be replaced when the operating device is
built-in or removed. Inserting the strip from the rear side of the front
plate does not influence the specified seal of the operator terminal. A
set of identification strips is supplied with the operator terminal.
For the labeling use:
In the editor, the key Delete deletes the character beneath the cursor.It
also deletes any selected messages from the data memory.
The key Print can be configured to activate a number of print pro-
cesses. A flashing LED indicates that a print process is in progress.
The function of function keys can be assigned as required (softkey func-
tionality). The function keys can optionally be used as direct selection
keys for menu control or to trigger a function in the controller.
The function of the soft keys is freely assignable. The function keys can
be used either as direct keys for menu control or for triggering a function
in the controller.
Single pieces, prototypes Label with a water-resistant pen
Small series Copying foil (thickness <= 70 µm) with
laser print
Large series Customer-specific labeled identification
strips