Bosch REXROTH IndraControl VAM 12.1, Руководство по планированию проекта

Страница: 45 / 96

6 Module Design
6.1 General Information
6.1.1 General Information
VAM 12.1/VAM 42.1 devices are delivered without a rear covering
plate.
6.1.2 Labeling Templates for Slide-In Strips
Please find the labeling templates on the Bosch Rexroth web site or contact
your sales representative.
The labels for the machine function keys and for the 22.5 mm control and indi‐
cator units can be created with the templates and can be printed on transparent
foil or on paper with the help of a laser printer.
After cutting out the slide-in strips, they can be inserted on the rear side of the
devices.
As the VAM 12.1 corresponds to the VAM 42.1 device, this device
is not described additionally.
6.2 Modules
6.2.1 EMERGENCY-STOP Button
I ndr a Cont r ol V
Fig.6-1: EMERGENCY STOP button
EMERGENCY STOP button This module slot is equipped with a standard EMERGENCY STOP button,
which is not wired. The two N/C contacts of the switching elements can be wired
with the EMERGENCY STOP circuits of the machine as required.
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels Bosch Rexroth AG 43/93
Module Design