Bosch rexroth IndraControl VAC 08.1 Скачать руководство пользователя страница 33

Страница: 33 / 40

14 Maintenance

Loss of IP degree of protection due to incorrect
maintenance.

NOTICE

Ensure that the IP degree of protection remains during maintenance!

Only the maintenance works at the device listed in this chapter are

permitted.
For further information in the event of repair, please contact the

Bosch Rexroth Service.

14.1 Regular maintenance tasks

The CDI+ splitter is maintenance-free.

●

Check all plug and terminal connections of the components for proper tight-

ness and possible damage at least once a year

●

Check that no cables are broken or pinched

●

Replace damaged parts immediately

15 Ordering information

15.1 Accessories and spare parts

For ordering information on accessories and spare parts, refer to

chapter 5 "Ac-

cessories" on page 6

15.2 Type code

The CDI+ splitter with CDI+ interface is available in different variants according

to the following type code:

IndraControl VAC 08.1 CDI+ Splitter

27/33

Ordering information

R911400465_Edition 01 Bosch Rexroth AG

Содержание rexroth IndraControl VAC 08.1









































Результаты поиска

Содержание rexroth IndraControl VAC 08.1

Отзывы:

Похожие инструкции для rexroth IndraControl VAC 08.1

Бренды по названию

Популярные бренды

Bosch rexroth IndraControl VAC 08.1, Руководство по эксплуатации

Результаты поиска

Содержание rexroth IndraControl VAC 08.1

Отзывы:

Похожие инструкции для rexroth IndraControl VAC 08.1

Бренды по названию

Популярные бренды