Bosch rexroth IndraControl PR4100, Руководство пользователя

Страница: 11 / 64

NOTICE
In case of non-compliance with this safety instruction, material damage can
occur.
3.3 Symbols used
Pointers are displayed as follows:
This is a note.
Tips are displayed as follows:
This is a tip.
3.4 Explaining the signal alert symbol on the device
krax
If this symbol is on your device, you have to observe the documentation
on the device. The respective documentation informs on the type of
hazard as well as the steps required to avoid this hazard.
4 Intended use
The PR4 and VR4 control cabinet and panel PCs are PC-based machine operator
and visualization terminals. Depending on the application or configuration, they
can also meet the control functionality. The devices are intended for the
following use cases:
●
Operator terminals, visualization terminals and programming terminals with
an integrated soft control in stand-alone machines
●
Operator terminals, visualization terminals and programming terminals for
connected IndraControl controls
IndraControl PR4 and VR4 Control cabi-
net PC and panel PC
5/57
Intended use
R911384699_Edition 03 Bosch Rexroth AG