Bosch Rexroth HMU05.1N Series страница 37 Скачать руководство пользователя

Страница: 37 / 410

gy". If this is not the case, they are excluded. Functional safety is a safe‐

ty concept in which measures of risk reduction for personal safety de‐

pend on electrical, electronic or programmable control systems.

●

The information given in the application documentation with regard to

the use of the delivered components contains only examples of applica‐

tions and suggestions.
The machine and installation manufacturers must
–

make sure that the delivered components are suited for their indi‐

vidual application and check the information given in this applica‐

tion documentation with regard to the use of the components,

–

make sure that their individual application complies with the appli‐

cable safety regulations and standards and carry out the required

measures, modifications and complements.

●

Commissioning of the delivered components is only allowed once it is

sure that the machine or installation in which the components are instal‐

led complies with the national regulations, safety specifications and

standards of the application.

●

Operation is only allowed if the national EMC regulations for the applica‐

tion are met.

●

The instructions for installation in accordance with EMC requirements

can be found in the section on EMC in the respective application docu‐

mentation.
The machine or installation manufacturer is responsible for compliance

with the limit values as prescribed in the national regulations.

●

The technical data, connection and installation conditions of the compo‐

nents are specified in the respective application documentations and

must be followed at all times.

National regulations which the user has to comply with
●

European countries: In accordance with European EN standards

●

United States of America (USA):
–

National Electrical Code (NEC)

–

National Electrical Manufacturers Association (NEMA), as well as

local engineering regulations

–

Regulations of the National Fire Protection Association (NFPA)

●

Canada: Canadian Standards Association (CSA)

●

Other countries:
–

International Organization for Standardization (ISO)

–

International Electrotechnical Commission (IEC)

3.2.3

Hazards by improper use

●

High electrical voltage and high working current! Danger to life or seri‐

ous injury by electric shock!

●

High electrical voltage by incorrect connection! Danger to life or injury by

electric shock!

●

Dangerous movements! Danger to life, serious injury or property dam‐

age by unintended motor movements!

●

Health hazard for persons with heart pacemakers, metal implants and

hearing aids in proximity to electric drive systems!

DOK-INDRV*-HXX05******-PR02-EN-P

Bosch Rexroth AG

35/407

Rexroth IndraDrive ML Drive Systems with HMU05

Safety instructions for electric drives and controls

Содержание Rexroth HMU05.1N Series



























































































































































































































































































































































































































Результаты поиска

Содержание Rexroth HMU05.1N Series

Отзывы:

Похожие инструкции для Rexroth HMU05.1N Series

Бренды по названию

Популярные бренды

Bosch Rexroth HMU05.1N Series, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth HMU05.1N Series

Отзывы:

Похожие инструкции для Rexroth HMU05.1N Series

Бренды по названию

Популярные бренды