Bosch Rexroth HMU05.1N Series, Руководство по планированию проекта

Страница: 132 / 410

Mechanical data
Spring terminal (connector) Unit Min. Max.
Connection cable
Solid wire
mm 2
1 10
Connection cable
Stranded wire without ferrule
mm
2
1 6
AWG 16 10
Connection cable
Stranded wire with ferrule
mm 2
1 4
Stripped length mm 10
Tab. 6-8: Mechanical data
Electrical data
Unit Min. Max.
Voltage load capacity V - U
N3
Power consumption W - P
N3
Current carrying capacity (looping through) A - 40 (UL: 31)
Allowed inductance µH - 100
(2 twisted single strands, 75
m long)
Tab. 6-9: Electrical data
Notes on installation Depending on the power consumption of the devices and the current carrying
capacity of the connector XD10, check the number of devices through which
one line for 24 V supply can be looped through. You may have to connect an‐
other device directly to the 24 V supply and then loop through the control volt‐
age from this device to other devices.
L+ L-, DC bus connection
Lethal electric shock from live parts with more
than 50 V!
WARNING
Before working on live parts: De-energize system and secure power switch
against unintentional or unauthorized reconnection.
Make sure voltage has fallen below 50 V before touching live parts!
Wait at least 30 minutes after switching off the supply voltages to allow dis‐
charging before accessing the device.
The discharge time can be more than 30 minutes if Y capacitor pairs are
used.
Secure the DC bus connections against being touched.
Function, pin assignment The DC bus connection connects the DC buses of multiple components.
Bosch Rexroth AG DOK-INDRV*-HXX05******-PR02-EN-P 130/407
Rexroth IndraDrive ML Drive Systems with HMU05
Mounting and installation