Bosch Rexroth GTE Series Скачать руководство пользователя

Страница: 81 / 88

Environmental Protection and Disposal

14.1

Environmental Protection

Production Processes

The products are made with energy- and resource-optimized production pro‐

cesses which allow re-using and recycling the resulting waste. We regularly try

to replace pollutant-loaded raw materials and supplies by more environment-

friendly alternatives.

Prohibited Substances

We guarantee that our products include no substances according to the chem‐

icals-ban-decree. We furthermore declare that our products are free of mercury,

asbestos, PCB and chlorinated hydrocarbons.

No Release of Hazardous Substan‐

ces

Our products do not contain any hazardous substances which may be released

in the case of appropriate use. Normally, our products will not have any negativ

influences on the environment.

Significant Components

Basically, our products contain the following components:

Electronic devices

Motors

∙ Steel

∙ Aluminum

∙ Copper

∙ Synthetic materials

∙ Brass

∙ Electronic components and modules

∙ Magnetic materials

∙ Electronic components and modules

14.2

Disposal

Return of Products

Our products can be returned to our premises free of charge for disposal. It is

a precondition, however, that the products are free of oil, grease or other dirt.
Furthermore, the products returned for disposal must not contain any undue

foreign material or foreign components.
Send the products ”free domicile” to the following address:

Bosch Rexroth AG

Electric Drives and Controls

Buergermeister-Dr.-Nebel-Strasse 2

97816 Lohr am Main, Germany

Packaging

The packaging materials consist of cardboard, wood and polystyrene. These

materials can be recycled anywhere without any problem.
For ecological reasons, please refrain from returning the empty packages to

us.

Recycling

Most of the products can be recycled due to their high content of metal. In order

to recycle the metal in the best possible way, the products must be disassem‐

bled into individual modules.
Metals contained in electric and electronic modules can also be recycled by

means of special separation processes. The synthetic materials remaining after

these processes can be thermally recycled.
If the products contain batteries or accumulators, these have to be removed

before recycling and disposed of.

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

79/85

Environmental Protection and Disposal

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth GTE Series

























































































Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды

Bosch Rexroth GTE Series, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды