Bosch Rexroth GTE Series Скачать руководство пользователя

Страница: 63 / 88

Handling, Transport and Storage

9.1

Handling

9.1.1

Identifying the Goods

Transport documents

The total scope of a delivery can be seen in the delivery note or waybill. How‐

ever, the contents of a delivery can be distributed over several packages.

Barcode Label

Each motor package is provided with a bar code label providing the following

data:
●

Type designation

●

Customer

●

Delivery note number

●

Consignment

The bar code label is provided for identification of the contents during process‐

ing of the order.

9.1.2

Name Plates

Gearboxes

The gearbox is delivered with a name plate. The name plate is attached to the

gearbox-housing. The name plate was extented by a 2D-barcode to improve

the read-in via barcode scanner and to have an additional possibility to read in.

2D - Barcode

Barcode

Fig.9-1:

Name plate (example GTE gearbox)

Motor-Gearbox Combination

The motor is delivered with its own separate type plate. This is attached to the

motor housing. In addition, a second type plate is attached using two-side tape

onto the original motor name plate. The second type plate can be attached

where visible on the machine, if the original type plate of the motor is concealed

by parts of the machine. Because of different national regulations, different type

plates are used for motors according to EN and UL-standards. The differences

are shown in the following picture.
The type plate is provided for
●

identification of the motor

●

Procurement of spare parts in case of a fault

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

61/85

Handling, Transport and Storage

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth GTE Series

























































































Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды

Bosch Rexroth GTE Series, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды