Bosch Rexroth GTE Series Скачать руководство пользователя

Страница: 29 / 88

Servo planetary gearboxes acc. to ATEX for mounting on Ex-mo‐

tors, like MSK motors acc to ATEX Standard are no products of

Rexroth and will not be offered or delivered neither separately nor

mounted.

Basically, assembly of ATEX gearboxes on Rexroth motors is possible. There‐

fore, obtain the gearboxes directly from the supplier and assemble them by

yourself.
We recommend the following manufacturer for the ATEX-gearboxes:
Neugart GmbH
Keltenstraße 16
77971 Kippenheim, Germany
Phone +49 (0) 78 25 – 847-0
Fax +49 (0) 78 25 – 847-2999
Email: [email protected]
Internet: http://www.neugart.de

5.3

Mechanical Features

Construction, installation position

Rexroth planetary gearboxes GTE are manufactured in the construction B05

for flange mounting. The installation positions can be done as described in the

following table according to EN 60034-7:1996-06.

Gearbox

Construction

Permissible Installation Positions according to

EN 60034-7:1996-06

Important Installation Note

B05

Vertical mounting position IM V3

. When installing IM V3 (vertically,

output shaft upwards) dam of liquid on

the drive shaft has to be avoided, as

liquid can penetrade into the gearbox

over a longer period of time.

Fig.5-5:

Permittable construction

Output Shaft

The output shaft of the planetary gearboxes is available in the following var‐

iants:
●

Smooth output shaft (standard)

For a plain non-positive shaft-hub connection.
Therewith, a higher smooth running and a free of clearance connection be‐

tween shaft and hub.

We recommend to use output shafts with non-positive shaft-hub

connections.

or
●

Output shaft with keyway according to DIN 6885-1:1968-08

For a form-fitting shaft-hub connection.
This connection mode is suitable for absorbtion of direction-constant speed at

low demand. It makes an additional axial safety of the hub necessary. There‐

fore, the frontal of the gearbox output shaft is provided with a centering hole

with a thread (see dimension sheet).

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

27/85

Application Notes

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth GTE Series

























































































Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды

Bosch Rexroth GTE Series, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды