Bosch Rexroth AGEV1-48404-AA/HM/L01H01-XC, Руководство по эксплуатации

Страница: 33 / 40

Extension and modification 33/40
RE 62272-B/03.19, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, Bosch Rexroth AG
12.5 Recycling
Due to the high metal share, hydraulic products can mostly be recycled. In order to
achieve an ideal metal recovery, disassembly into individual assemblies is required.
The metals contained in electric and electronic assemblies can also be recovered by
means of special separation procedures.
13 Extension and modification
WARNING
Explosion hazard caused by unauthorized modification!
Any unauthorized modification results in the loss of the explosion protection.
▶ Modifications exceeding the extent described in these operating instructions are
not permitted.
14 Troubleshooting
14.1 How to proceed for troubleshooting
▶ Always work systematically and purposefully, even when under time pressure.
Random and imprudent disassembly and changing of settings can, in the worst-
case scenario, result in the inability to determine the original cause of error.
▶ First obtain a general overview of how your product works in conjunction with the
entire system.
▶ Try to find out whether the product has functioned properly in conjunction with
the overall system before the fault occurred.
▶ Try to determine any changes of the overall system in which the product is
integrated:
– Were there any changes to the product’s operating conditions or operating
range?
– Were there any changes (e.g. retrofit) or repairs carried out on the complete
system (machine/system, electrics, control) or on the product? If yes: What
were they?
– Was the product or machine used as intended?
– How did the fault become apparent?
▶ Try to get a clear idea of the cause of fault.
▶ If you cannot rectify the error, contact one of the contact addresses which can be
found at:
www.boschrexroth.com/addresses