RE 29696-01-B/2021-06-15, Bosch Rexroth AG
Safety instructions |
4THE5 9
/24
2�5 General safety instructions
• Observe country-specific accident prevention and environmental protection
regulations.
• Observe the safety regulations of the country in which the product is used/
operated.
• Use Rexroth products only when they are in good working order.
• Do not install, operate, disassemble or maintain Rexroth products if under the
influence of alcohol, drugs or medication that may affect your reaction time.
• Only use approved accessories and original spare parts from Rexroth in order to
exclude hazards to persons due to unsuitable spare parts.
• Observe the technical data and ambient conditions specified in the product
documentation.
• If unsuitable products are installed or used in applications that are of relevance
to safety, unexpected operating conditions may occur in the application, which
could result in personal injury or property damage. For this reason, only use
the product in safety-relevant applications if this use is expressly indicated and
approved in the product documentation, e.g. in safety-related parts of a control
system (functional safety).
• Only commission the product if it has been determined that the end product
(e.g. machinery/system) in which the Rexroth products are installed complies
with the country-specific provisions, safety regulations and standards for the
application.
• Use tools appropriate for the work being performed and wear appropriate
protective clothing to prevent punctures and cuts (e.g. when removing protective
covers, disassembly).
• The proposed circuits do not imply any technical liability for the system on the
part of Bosch Rexroth.
• Opening the joystick or carrying out modifications to or repairs on the joystick
is prohibited. Modifications to or repairs on the wiring can lead to dangerous
malfunctions.
• The joystick may only be installed/disassembled in a de-energized and
depressurized state.
• Make sure that nobody is in the machine’s danger zone.
• Do not use defective components or components which are not in a proper
working order. If the joystick fails or demonstrates a faulty operation, it must be
replaced.
• Despite the greatest care being taken when compiling this document, it is
not possible to consider all feasible applications. If notices for your specific
application are missing, please contact Bosch Rexroth.
