Bosch Rexroth 1MB Скачать руководство пользователя страница 15

Страница: 15 / 68

About this documentation

1.1

Validity of the documentation

This instruction has to be complied with by assemblers, operator, service en‐

gineers and facility operators. It contains notes about handling the motor

components rotor and stator of a 1MB Asynchronous spindle motor from de‐

livery up to disassembly and disposal.
Before operating motors, read this operating instruction to ensure a safe and

smooth functionality and a long motor lifetime.

1.2

Editions of this documentation

Edition

Release

date

Notes

07/2012 First edition

04/2021 Revision and amendment

07/2022 Amendment; EAC label removed, UKCA label added

Tab. 1-1:

Record of revisions

1.3

Additional documentation

This operating instruction is only valid with the following Rexroth documenta‐

tion:

Title

Document type

Document number

1MB
Kit Spindle Motors

Project Planning

Manual

DOK-MOTOR*-1MB********-PR□□-□□-P

Connection cables
IndraDrive and IndraDyn

Selection data

DOK-CONNEC-CABLE*INDRV-AU□□-□□-P

Connection System, Assembly and Tools ...

Assembly Instruc‐

tions

DOK-CONNEC-CAB*INSTR02-MA□□-□□-P

Electromagnetic Compatibility (EMC) in Drive and

Control Systems

Project Planning

Manual

DOK-GENERL-EMC********-PR□□-□□-P

Tab. 1-2:

Additional documentation

1.4

Presentation of information

Safety instructions

The safety notes in this documentation describe signal words (danger, warn‐

ing, caution, note) and a signal symbol (acc. to ANSI Z535.6-2006).
The signal word is intended to draw your attention to the safety instructions

and describes the seriousness of the danger. The warning triangle with excla‐

mation mark indicates the danger for persons.

DANGER

Non-compliance with this safety instructions will result in death or severe per‐

sonal injury.

1MB Asynchronous Spindle Motors

1/53

About this documentation

R911337309_Edition 03 Bosch Rexroth AG

Содержание Rexroth 1MB





































































Результаты поиска

Содержание Rexroth 1MB

Отзывы:

Похожие инструкции для Rexroth 1MB

Бренды по названию

Популярные бренды

Bosch Rexroth 1MB, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth 1MB

Отзывы:

Похожие инструкции для Rexroth 1MB

Бренды по названию

Популярные бренды