Bosch PXY8 KV Series, Инструкция по эксплуатации

Страница: 19 / 28

Home Connect
en
19
22.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
1.
At room temperature, place the cookware with ap-
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select the "Test cook-
ware" option.
3.
Follow the instructions on the display panel.
a After 10 seconds, the result appears in the cooking
zone displays.
Note:
To activate the function, return to the basic set-
tings and select Cookware test.
23 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
"Safety", Page 2
¡
Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
23.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡
The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.
3.
Follow the instructions in the Home Connect app.
23.2 Overview of the Home Connect
settings
You can adjust the settings and network settings for
Home Connect by going to your hob's basic settings.
The hob shows the setting "Set using the assistant" if
the hob is not connected to the home network. All
other settings are only displayed if the hob is already
connected to the Wi-Fi.
Setting Description and options
Set using the
assistant The hob can be set up to automatic-
ally log into your home network, or
you can do this manually.
¡
Use the assistant to configure the
settings (automatic connection to
the home network).
1
¡
Use the assistant to configure the
settings: WPS not supported
(manually log into your home net-
work).
Connect to
app You can connect the hob to one or
more Home Connect accounts.
Set using the
app
¡
Off: Only the hob's current status
is displayed in the app.
¡
On
1
: You can send cooking set-
tings from the app to the hob. The
cooking settings that are sent
must be confirmed on the hob.
Wi-Fi You can switch off the hob's wireless
module to disconnect it from the Wi-
Fi.
¡
Deactivated: The wireless module
is switched off.
¡
Activated
1
: Wireless module con-
nected.
1 Factory setting