10
| English
2 609 006 337 | (18.7.12)
Bosch Power Tools
f
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool.
When using oth-
er batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Additional Safety and Working
Instructions
f
Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health and cause allergic reactions, lead to respi-
ratory infections and/or cancer.
Materials containing as-
bestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
f
Prevent dust accumulation at the workplace.
Dusts can
easily ignite.
f
Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position.
Unintentional actuation of the On/Off switch can
lead to injuries.
f
The battery is supplied partially charged. To ensure full
battery capacity, completely charge the battery in the
battery charger before using for the first time.
f
Read the operating instructions of the battery charger.
f
Apply the power tool to the screw only when it is
switched off.
Rotating tool inserts can slip off.
f
Adjust the gear switch only when the machine is at a
complete stop.
f
If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
f
The battery charge-control indicator indicates the
charge condition of the battery for a few seconds when
the On/Off switch is pressed half or fully through. It
consists of a three-colour illuminating LED.
f
When not using the power tool, switch it off in order to save
energy.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
LED
Capacity
Continuous lighting, green
≥
66%
Continuous lighting, orange
33—66%
Continuous lighting, red
11—33%
Flashing light, red
≤
11%
Symbol
Meaning
PSB 10,8 LI-2: Combination Cordless
Drill
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Screwdriving
Drilling without impact
Impact drilling
Low speed
High speed
Switching On
Switching Off
U
Rated voltage
n
0
1
No-load speed (1. gear)
n
0
2
No-load speed (2. gear)
n
S
Impact rate
M
Maximum torque according to ISO 5393
Brickwork
OBJ_BUCH-1652-001.book Page 10 Wednesday, July 18, 2012 1:44 PM
