8
The gas burners
Operation
The appliance has been factory adjusted so that the first
time it is connected the childproof lock is automatically
activated. To deactivate the childproof lock, keep the
"child blocker" switch pressed down several seconds
until the main switch’s light comes on. The hob is now
ready for use.
In case of a power failure or voltage drop, the childproof
lock will be automatically activated when switching on the
appliance again.
There are indications to show which burner each control
knob operates. Fig. 1.
It is essential to ensure that all the burner parts and the
pan supports are correctly installed for the appliance to
work correctly. Fig. 2-3-4.
To turn on a burner
Connect the appliance by means of the main switch, its
indicator which will come on. Then turn the chosen
burner control to the left (anticlockwise) to the required
position. The flame will automatically and the hotplate
indicator light will come on.
If the main switch has been pushed but no burner
ignited, the appliance will switch itself off automatically
after 3 minutes.
If the burner goes out (e.g. a draught) when in use, the
appliance will switch the hotplate on again automatically.
If this ignition is unsuccessful (e.g. as a result of
boiled-over liquid on the burner), the flow of gas to this
Fig. 1
Fig. 2
Fig. 3
Fig. 4
