Bosch Praesideo 3.5, Инструкция по установке и эксплуатации

Страница: 440 / 498

Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software en | 440
55.8 Column Chooser dialog
The Column Chooser dialog box is invoked from the
View menu or by right-clicking on the column header
and selecting More... The Column Chooser allows
SNMP variables to be added to and/or removed from
the Discovery window and the SNMP polling list.
55.8.1 Available OID
A number of commonly-monitored SNMP variables are
displayed by default in the
Available OID window.
55.8.2 lWatch list OID
This window displays the list of SNMP variables to be
monitored. Each of these will be shown as its own
column in the discovery window. Variables may be
added to this list by selecting the desired variable in the
Available OID window and then clicking the > button.
Similarly, variables may be removed from this list by
selecting the desired variable in the
Watch List OID
window and clicking the < button.
55.8.3 Add
Allows SNMP variables other than those shown by
default in the
Available OID window to be added to the
list of available OIDs. When Add is invoked a
secondary dialog with the following controls is
displayed.
•
Object ID
Enter the full system object identifier (OID) of the
variable to be monitored.
• Column name
Enter the desired name to be displayed in the
column header for the OID specified.
55.8.4 Edit
Edit an OID specification previously created with Add.
The same secondary dialog is shown with Object ID
and Column Names pre-filled with current values. Note
that an item can only be selected for editing when
displayed in the Available OID pane.
55.8.5 Delete
Allows previously-added, custom SNMP variables to be
removed from the list of
Available OID s. To delete a
variable from the Available OID list, simply select the
variable and press the Delete button. Note that the
default SNMP variables can not be deleted.
55.8.6 Default
Clicking this button moves all of the default SNMP
variables shown in the
Available OID window into the
Watch List OID window.
figure 55.3: Column Chooser dialog