Bosch Praesideo 3.5, Инструкция по установке и эксплуатации

Страница: 394 / 498

Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 394
47.3.19 Local BGM source
The Local BGM source action is used to step through all
available BGM sources in the assigned zone (groups)
including an inserted ‘BGM off’ position. See figure
47.26 for an overview of the
Action programming page for
a Local BGM source key.
• Action type - Sets the action type.
• Available outputs - Shows the available zones and
zone groups. Use the dropdown list to choose the
type of outputs that are shown.
• Add/Remove buttons - Using the > and <
buttons, selected outputs can be added to or
removed from
Assigned outputs .
• Assigned outputs - Shows the outputs that have
been assigned to the key.
47.3.20 Local BGM volume control
The Local BGM volume control action is used to control
the volume of the BGM in the assigned zone (groups).
It can be changed in steps of 3 dB between -96 dB and
0 dB. See figure 47.26 for an overview of the
Action
programming page for a Local BGM volume control key.
• Action type - Sets the action type.
• Volume control - Sets the type of volume control.
To increase the volume, select Volume up . To decrease
the volume, select Volume down .
• Available outputs - Shows the available zones and
zone groups. Use the dropdown list to choose the
type of outputs that are shown.
• Add/Remove buttons - Using the > and <
buttons, selected outputs can be added to or
removed from
Assigned outputs .
• Assigned outputs - Shows the outputs that have
been assigned to the key.
Note
This action can also be assigned to control
inputs.
figure 47.26: Local BGM source key
Note
This action can also be assigned to control
inputs.
figure 47.27: Local BGM volume control key